Supplier Inquiry
We are looking for suppliers that
know the importance of Safety, Quality,
Delivery Time, Cost Reduction,
Environmental Awareness
and Technical Development.
Products We Are Looking for
Multi-Functional Products
Materials |
Fine fibers |
|---|---|
Materials with excellent thermal insulation properties | |
Materials with high thermal conductivity | |
Corrosion-resistant materials (e.g., stainless steel) | |
Method |
High-speed precision forming (for difficult-to-machine materials and small-diameter components) |
Specialized papermaking processes (e.g., thick paper, three-dimensional forming) | |
Metal surface roughening treatments (environmentally friendly processes) | |
High-speed and uniform oil/grease coating technology | |
Surface treatments to avoid adhesion of materials in cutting/forming processes | |
Adhesives works at room-temperature and low-temperature for bonding materials | |
Quality Evaluation |
Wettability evaluation of material surfaces |
Oil//grease penetration condition inside materials | |
Thickness measurement for cylindrical samples | |
Machine |
Roll-to-roll equipment for heating and compressing friction materials |
Fully automated production line for small-diameter cylindrical components |
Electrification compatible products
Case
Specifications
| Material | ADC12 |
|---|---|
| Weight | 1kg - 2kg |
| Dimensions | φ200 - φ300mm × 40mm (thickness) |
Production Information
| Potential Procurement Quantity |
20 - 2,000 pc/M |
|---|---|
| remarks | Die Cast Casting → Finishing / Deburring |
Rotor Support Component
Specifications
| Material | SUS304 |
|---|---|
| Weight | 1kg - 2kg |
| Dimensions | φ200 - φ300mm × 5 - 7mm (thickness) |
Production Information
| Potential Procurement Quantity |
10 - 1,000 pc/M |
|---|---|
| remarks | Patented by Dynax Corp. |
Planetary Reduction Gear Assembly
Specifications
| Material | SCM440H / SCr420H / S15C etc. (or same level) |
|---|---|
| Weight | - |
| Dimensions | φ120mm |
| Heat treatment | Carburizing, quenching and induction hardening |
Production Information
| Potential Procurement Quantity |
10 - 1,000 set/M |
|---|---|
| Remarks | Forging → Heat treatment → Turning → Gear cutting → Tooth chamfering → Shaving → Drill → Heat treatment → Turning |
Magnet
Specifications
| Material | NdFeB Sintered / Ferrite |
|---|---|
| Weight | About 10g |
| Dimensions | 34mm×33mm×10mm (thickness) |
| Heat treatment | - |
Production Information
| Potential Procurement Quantity |
160 - 16,000 pc/M |
|---|---|
| Remarks | - |
Rotor Flange
Specifications
| Material | SCM415 / SCM420 (or same level) |
|---|---|
| Weight | About 1kg |
| Dimensions | φ30mm (flange φ105mm) ×160mm (length) |
| Heat treatment | Carburizing, quenching and tempering |
Production Information
| Potential Procurement Quantity | 10 - 1,000 pc/M |
|---|---|
| Remarks | ‐ |
Coil
Specifications
| Material | Copper, Resin etc. |
|---|---|
| Weight | About 0.8kg |
| Dimensions | φ200 - φ300mm |
| Heat treatment | - |
Production Information
| Potential Procurement Quantity | 20 - 2,000 set/M |
|---|---|
| Remarks | Copper wire diameter: Φ1.0 - Φ1.5mm Polyamide-imide copper wire (AIW) / Polyimide copper wire (PIW) |
Soft Magnetic
Specifications
| Material | Soft Magnetic Composites |
|---|---|
| Weight | About 0.3kg/pc |
| Dimensions | φ200 - φ300mm × 26mm (thickness) |
| Heat treatment | - |
Production Information
| Potential Procurement Quantity | 120 - 12,000 pc/M |
|---|---|
| Remarks | Required Characteristics: Somaloy 700 1P (or same level) |
Terminal Block
Specifications
| Material | Copper, Resin |
|---|---|
| Weight | About 0.1kg/pc |
| Dimensions | 62mm × 26mm × 16mm (thickness) |
| Heat treatment | - |
Production Information
| Potential Procurement Quantity | 10 - 1,000 pc/M |
|---|---|
| Remarks | - |